Start with the shirt you actually have
The SD Signature Series is a Comfort Colors tee printed in the USA with fade-resistant inks. That fade-resistant claim is about the ink, not a free pass to treat the shirt roughly. The same basic care that protects any premium cotton tee—gentle washing, low heat, and a little attention to the print—will help this one stay sharp for seasons.
The catalog does not include a separate care label transcript, so this guide sticks to widely accepted best practices for printed cotton tees. If your shirt arrives with a printed care tag, follow that tag first; it is the most specific instruction for your exact garment.
What the catalog confirms
- SD Signature Series: Designed by the Jomboy Media team and printed in the USA with fade-resistant inks on a premium Comfort Colors shirt. Fade-resistant inks are a good starting point, but how you wash and dry the shirt still determines how long the print looks crisp.
SD Signature Series
A simple wash routine for the SD Signature Series tee
These steps are general guidance for printed cotton tees, not a manufacturer-specific procedure. Adjust only if your shirt’s care tag says otherwise.
- Turn it inside out: This puts the fabric—not the printed graphic—against the drum and other items in the load, reducing abrasion on the ink.
- Wash cold on a gentle cycle: Cold water and a gentle cycle are easier on cotton fibers and printed graphics than hot water and heavy agitation.
- Use a mild detergent: Skip bleach and fabric softener. Bleach can dull colors, and softener can leave a residue that affects the hand feel of the cotton.
- Wash with similar colors: Espresso and Khaki are both neutral, but new dark cotton can release some dye in the first few washes. Washing with similar colors protects the shirt and everything else in the load.
Drying tips that protect the print
High heat is the most common way a printed tee loses its crisp look. For the SD Signature Series, air-drying is the safest default: reshape the shirt while it is damp and hang it or lay it flat away from direct sun. If you use a dryer, choose the lowest heat setting and remove the shirt while it is still slightly damp, then hang it to finish drying. Avoid dryer sheets, which can coat the fabric and the print.
The catalog does not specify a maximum dryer temperature for this shirt, so treat low heat as a conservative choice rather than a confirmed limit.
Checkpoints before and after each wash
- Check the care tag first: If the shirt includes a printed care label, its instructions take priority over any general advice here.
- Fasten nothing, empty pockets: The SD Signature Series is a standard tee with no zippers or hardware, but turning it inside out and checking for anything clipped to it prevents snags.
- Inspect the print after washing: Look for cracking, dulling, or lifting at the edges. Catching early signs lets you switch to air-drying or a gentler cycle before the print degrades further.
- Store folded, not on a hanger: Hanging a cotton tee for long periods can stretch the shoulders. Folding keeps the shape and keeps the print from rubbing against other clothes.
What to do if the print starts to look tired
Fade-resistant inks are designed to hold color, but no printed tee stays perfect forever. If you notice the graphic dulling, first confirm you are washing cold and drying low. Avoid ironing directly on the print; if you need to smooth wrinkles, iron the shirt inside out on a low setting or use a pressing cloth. The catalog does not confirm whether the print can be ironed directly, so keep the iron off the graphic itself.
For stains, treat them promptly with a mild stain remover and wash as usual. Do not scrub the printed area aggressively—gentle blotting is safer for the ink.
